BROBOXDB
Seeed Studio Seeed Studio XIAO ESP32C3

primary

1 / 2

Catalog ID / P985855214253

Seeed Studio Seeed Studio XIAO ESP32C3

Official Seeed wiki checked: ESP32-C3/RISC-V single core up to 160 MHz; 400 kB SRAM/4 MB onboard flash; Wi-Fi and Bluetooth 5 BLE/Mesh; 21 x 17.8 mm.

Category
Controller
Type
controller / main_controller
Manufacturer
Seeed Studio
MPN
XIAO ESP32C3

Key selection specs

Input voltage

5 V

Logic voltage

3.3 V

Dimensions

21 × 17.8 mm

Processor

ESP32-C3, 32-bit RISC-V single-core up to 160 MHz

Memory

400 kB SRAM; 4 MB onboard flash

Wireless

Wi-Fi 802.11 b/g/n; Bluetooth 5 BLE/Mesh

Open datasheet

Compare similar parts

Parts in the same subcategory with shared normalized specifications.

Arduino Nano ESP32

Arduino

Arduino Nano ESP32

Specification edge+63%Alternative ahead
  • Processor coresCurrent1Alternative2
  • Processor clockCurrent160 MHzAlternative240 MHz
View full comparison →
Espressif ESP32-C3-DevKitC-02

Espressif

Espressif ESP32-C3-DevKitC-02

Specification edge0%Tie
    View full comparison →
    Espressif ESP32-C6-DevKitC-1

    Espressif

    Espressif ESP32-C6-DevKitC-1

    Specification edge+17%Alternative ahead
    • FlashCurrent4 MBAlternative8 MB
    View full comparison →
    Arduino Nano 33 BLE Rev2

    Arduino

    Arduino Nano 33 BLE Rev2

    Specification edge+43%Current part ahead
    • Processor clockCurrent160 MHzAlternative64 MHz
    • RAMCurrent0.3906 MBAlternative0.25 MB
    View full comparison →

    Technical specs

    Start with the specs that decide fit and purchase.

    Controller board specs

    21
    Board kind
    main controller
    Board architecture
    microcontroller board
    Primary application
    robotics;embedded_control
    Processor vendor
    Espressif
    Processor
    ESP32-C3
    Processor architecture
    RISC-V
    Processor cores
    1
    Processor clock
    160 MHz
    RAM
    0.3906 MB
    Flash
    4 MB
    Storage
    onboard_flash
    SDK available
    Yes
    Firmware updatable
    Yes
    Connectors
    USB-C/5V VIN; BAT 3.7V; 3V3 regulated output
    Wireless interfaces
    Wi-Fi;Bluetooth LE;Bluetooth Mesh
    Communication interfaces
    Wi-Fi;Bluetooth LE;Bluetooth Mesh;GPIO
    Compute board kind
    microcontroller
    Microcontroller
    ESP32-C3
    Ram Mb
    0.3906
    Onboard Flash Mb
    4
    Programming Languages
    Arduino;MicroPython;PlatformIO

    Power / electrical specs

    1
    Input voltage (nominal)
    5 V

    Related Forum posts

    General Discussion posts attached to this part, newest first.

    Write a post about this part

    No linked posts yet.