Part series
Flipsky FSESC / VESC-compatible
Compare products from the same manufacturer series using exact shared specification fields.
3 products22 shared specs
| Specification | Flipsky 75100 75 V 100 A Single ESC | Flipsky 75100 Pro V2.0 | Flipsky Mini FSESC6.7 PRO 70A |
|---|---|---|---|
| Interfaces | USB; CAN; UART | USB;CAN;UART;PPM;ADC;NRF | USB;CAN;UART;SPI;I2C;PPM;ADC;NRF |
| Board kind | motor driver | motor driver | motor driver |
| Board architecture | standalone board | standalone board | standalone board |
| Primary application | robotics;mobile_robot;traction | AGV;mobile_robot;high_power_motion_control | robot_joint;AGV;mobile_robot;motion_control |
| Firmware updatable | Yes | Yes | Yes |
| CAN interfaces | 1 | 1 | 1 |
| Communication interfaces | USB;CAN;UART;PWM;analog | USB;CAN;UART;PPM;ADC;NRF | USB;CAN;UART;SPI;I2C;PPM;ADC;NRF |
| Control modes | duty_cycle;voltage | torque;velocity | current;duty_cycle;speed;position |
| Motor drive | bldc foc | bldc foc | bldc foc |
| Motor channels | 1 | 1 | 1 |
| Phases | 3 | 3 | 3 |
| Control algorithm | FOC | FOC;square_wave | DC;BLDC;FOC |
| Encoder support | ABI;hall;AS5047;AS5048A | ABI;hall;AS5047;AS5048A | ABI;hall;AS5047;AS5048A |
| Hall sensor support | Yes | Yes | Yes |
| Config Tool | VESC Tool | VESC Tool | VESC Tool |
| Firmware Ecosystem | VESC-compatible | VESC-based firmware 6.06 | VESC6.6-based; factory firmware 5.2 recommended by manufacturer |
| Input voltage (min) | 14 V | 14 V | 14 V |
| Input voltage (max) | 84 V | 84 V | 60 V |
| Continuous output current / channel | 100 A | 100 A | 70 A |
| Peak output current / channel | 120 A | 150 A | 200 A |
| Regenerative braking | Yes | Yes | Yes |
| Protections | overcurrent;overtemp | phase_filter | low_voltage;high_voltage;over_current;temperature;MOSFET_overtemperature |