Raspberry Pi Pico 2

Category: Controller
Type: controller / maker_controller
Manufacturer: Raspberry Pi
MPN: SC1631 / SC1632

Key selection specs

Input voltage

1.8 V – 5.5 V

Logic voltage

3.3 V

Technical specs

Start with the specs that decide fit and purchase.

Controller board specs

Board kind: maker controller
Board architecture: microcontroller dev board
Primary application: robotics;embedded_control;education;microcontroller
Processor vendor: Raspberry Pi
Processor: RP2350

Used in builds

Jump to the builds that actually used this part.

No linked builds yet

This appears once a published build references the part.

Community

Field reports are separate from official specs and sources.

Part posts

Reusable reports for tests, comparisons, and fixes.

Write a post

No posts yet

Add the first field report.

Official specifications

RP2350 microcontroller board; dual Arm Cortex-M33 and dual Hazard3 RISC-V cores selectable; 150MHz; 520KB SRAM; 4MB QSPI flash; 26 multifunction GPIO; USB 1.1 controller; 2x UART, 2x SPI, 2x I2C, 24 PWM channels, 12 PIO state machines.

Processor architecture

Arm Cortex-M33;Hazard3 RISC-V

Processor clock

150 MHz

Operating system

bare-metal;MicroPython;CircuitPython

Open-source hardware

Yes

Open-source firmware

Yes

Firmware updatable

Yes

Connectors

USB micro-B; castellated/through-hole GPIO pads

Communication interfaces

GPIO;UART;I2C;SPI;USB;PWM;PIO

Compute board kind

microcontroller

Microcontroller

RP2350

Image Review

official datasheet extracted physical board photo img-000.png

Pio State Machines

Power / electrical specs

Input voltage (nominal): 5 V
Input voltage (min): 1.8 V
Input voltage (max): 5.5 V