primary
1 / 1
Catalog ID / P270820727651
Teensy 4.0
PJRC Teensy 4.0 controller specifications: Official specifications: NXP i.MX RT1062 Cortex-M7 at 600MHz; 1024K RAM; 1984K flash; 40 digital I/O; 31 PWM; 14 analog inputs; 7 serial, 3 SPI, 3 I2C, 2 I2S/TDM, S/PDIF, CAN FD; Arduino IDE with Teensyduino.; Board kind: maker controller; Board…
- Category
- Controller
- Type
- controller / maker_controller
- Manufacturer
- PJRC
- MPN
- Teensy 4.0
Key selection specs
Input voltage
3.6 V – 5.5 V
Logic voltage
3.3 V
Dimensions
35.56 × 17.78 mm
Official specifications
NXP i.MX RT1062 Cortex-M7 at 600MHz; 1024K RAM; 1984K flash; 40 digital I/O; 31 PWM; 14 analog inputs; 7 serial, 3 SPI, 3 I2C, 2 I2S/TDM, S/PDIF, CAN FD; Arduino IDE with Teensyduino.
Compare similar parts
Parts in the same subcategory with shared normalized specifications.
Technical specs
Start with the specs that decide fit and purchase.
Controller board specs
32- Board kind
- maker controller
- Board architecture
- microcontroller dev board
- Primary application
- robotics;embedded_control;high_performance_microcontroller
- Processor vendor
- NXP
- Processor
- i.MX RT1062
- Processor architecture
- Arm Cortex-M7
- Processor cores
- 1
- Processor clock
- 600 MHz
- RAM
- 1 MB
- Flash
- 1.9375 MB
- Storage
- onboard flash
- Operating system
- bare-metal;Arduino;CircuitPython
- Open-source hardware
- No
- Open-source firmware
- No
- SDK available
- Yes
- ROS support
- No
- Firmware updatable
- Yes
- Connectors
- USB micro-B; through-hole/castellated pins; breadboard-friendly 1.4 x 0.7 inch module
- CAN interfaces
- 1
- UART interfaces
- 7
- I2C interfaces
- 3
- SPI interfaces
- 3
- USB interfaces
- 1
- GPIO
- 40
- Communication interfaces
- GPIO;UART;I2C;SPI;USB;CAN FD;I2S;S/PDIF;PWM
- Compute board kind
- microcontroller
- Microcontroller
- i.MX RT1062
- SoC
- NXP i.MX RT1062
- Digital Io
- 40
- Pwm Outputs
- 31
- Image Review
- official PJRC physical product photo teensy40_front.jpg
- Analog Inputs
- 14
Power / electrical specs
3- Input voltage (nominal)
- 5 V
- Input voltage (min)
- 3.6 V
- Input voltage (max)
- 5.5 V
Related Forum posts
General Discussion posts attached to this part, newest first.
No linked posts yet.