Stall torque
Part A1.412 Nm0.118 Nm higher
Part B1.294 Nm
Part comparison
A side-by-side comparison of source-backed specifications within the same subcategory.
Directional spec summary
Counts across 3 numeric specifications with a clear higher-or-lower direction.
Part A leads
2
Tied
1
Part B leads
0
These are metric-by-metric differences, not an overall performance score. Check the values below.
12 specifications compared side by side.
| Compare bySpecification | AHitecHitec HS-755MG | BHitecHitec HS-765HB |
|---|---|---|
| Performance3 | ||
| Stall torque | 1.412 Nm0.118 Nm higher | 1.294 Nm |
| Stall torque @ 6V | 14.4 kg·cm1.2 kg·cm higher | 13.2 kg·cm |
| Speed @ 6V | 0.23 s/60° | 0.23 s/60° |
| Electrical1 | ||
| Nominal voltage | 6 V | 6 V |
| Mechanical & integration4 | ||
| Motor kind | Rc servo | Rc servo |
| Drive principle | servo actuator | servo actuator |
| Architecture | Rc servo module | Rc servo module |
| Gear materialUse-dependent | Metal | Resin |
| Control & communication3 | ||
| Communication interfaces | PWM | PWM |
| Control modes | PWM servo | PWM servo |
| Servo signal | PWM | PWM |
| Other specifications1 | ||
| PWM pulse center | 1500 µs | 1500 µs |
Product sources used by this comparison