Stall torque
Part A0.402 Nm
Part B2.844 Nm2.442 Nm higher
Part comparison
A side-by-side comparison of source-backed specifications within the same subcategory.
Directional spec summary
Counts across 3 numeric specifications with a clear higher-or-lower direction.
Part A leads
0
Tied
0
Part B leads
3
These are metric-by-metric differences, not an overall performance score. Check the values below.
12 specifications compared side by side.
| Compare bySpecification | AHitecHitec D71MH | BHitecHitec D955TW |
|---|---|---|
| Performance3 | ||
| Stall torque | 0.402 Nm | 2.844 Nm2.442 Nm higher |
| Stall torque @ 7.4V | 4.1 kg·cm | 29 kg·cm24.9 kg·cm higher |
| Speed @ 7.4V | 0.13 s/60° | 0.12 s/60°0.01 s/60° lower |
| Electrical1 | ||
| Nominal voltage | 7.4 V | 7.4 V |
| Mechanical & integration4 | ||
| Motor kind | Rc servo | Rc servo |
| Drive principle | servo actuator | servo actuator |
| Architecture | Rc servo module | Rc servo module |
| Gear materialUse-dependent | Metal | Titanium |
| Control & communication3 | ||
| Communication interfaces | PWM | PWM |
| Control modes | PWM servo | PWM servo |
| Servo signal | PWM | PWM |
| Other specifications1 | ||
| PWM pulse center | 1500 µs | 1500 µs |
Product sources used by this comparison