Stall torque
Part A0.981 Nm
Part B6.08 Nm5.099 Nm higher
Part comparison
Hitec D625MW vs JX Servo PDI-HV2060MG
A side-by-side comparison of source-backed specifications within the same subcategory.
11 shared specs3 scored
Directional spec summary
Counts across 3 numeric specifications with a clear higher-or-lower direction.
Part A leads
0
Tied
1
Part B leads
2
These are metric-by-metric differences, not an overall performance score. Check the values below.
Specifications
11 specifications compared side by side.
| Compare bySpecification | AHitecHitec D625MW | BJX ServoJX Servo PDI-HV2060MG |
|---|---|---|
| Performance3 | ||
| Stall torque | 0.981 Nm | 6.08 Nm5.099 Nm higher |
| Stall torque @ 7.4V | 10 kg·cm | 62 kg·cm52 kg·cm higher |
| Speed @ 7.4V | 0.13 s/60° | 0.13 s/60° |
| Mechanical & integration4 | ||
| Motor kind | Rc servo | Rc servo |
| Drive principle | servo actuator | servo actuator |
| ArchitectureUse-dependent | Rc servo module | Integrated servo module |
| Gear material | Metal | metal |
| Control & communication3 | ||
| Communication interfaces | PWM | PWM |
| Control modesUse-dependent | PWM servo | PWM servo;programmable |
| Servo signal | PWM | PWM |
| Other specifications1 | ||
| PWM pulse center | 1500 µs | 1500 µs |
AHitecHitec D625MW
BJX ServoJX Servo PDI-HV2060MG
Performance3
Stall torque @ 7.4V
Part A10 kg·cm
Part B62 kg·cm52 kg·cm higher
Speed @ 7.4V
Part A0.13 s/60°
Part B0.13 s/60°
Mechanical & integration4
Motor kind
Part ARc servo
Part BRc servo
Drive principle
Part Aservo actuator
Part Bservo actuator
ArchitectureUse-dependent
Part ARc servo module
Part BIntegrated servo module
Gear material
Part AMetal
Part Bmetal
Control & communication3
Communication interfaces
Part APWM
Part BPWM
Control modesUse-dependent
Part APWM servo
Part BPWM servo;programmable
Servo signal
Part APWM
Part BPWM
Other specifications1
PWM pulse center
Part A1500 µs
Part B1500 µs
Product sources
Product sources used by this comparison
Hitec D625MWNo public source
JX Servo PDI-HV2060MGOpen source ↗