Stall torque
Part A4.021 Nm2.883 Nm higher
Part B1.138 Nm
Part comparison
A side-by-side comparison of source-backed specifications within the same subcategory.
Directional spec summary
Counts across 3 numeric specifications with a clear higher-or-lower direction.
Part A leads
3
Tied
0
Part B leads
0
These are metric-by-metric differences, not an overall performance score. Check the values below.
11 specifications compared side by side.
| Compare bySpecification | AFutabaFutaba S9177SV | BHitecHitec D646WP |
|---|---|---|
| Performance3 | ||
| Stall torque | 4.021 Nm2.883 Nm higher | 1.138 Nm |
| Stall torque @ 7.4V | 41 kg·cm29.4 kg·cm higher | 11.6 kg·cm |
| Speed @ 7.4V | 0.11 s/60°0.05 s/60° lower | 0.16 s/60° |
| Mechanical & integration4 | ||
| Motor kind | Rc servo | Rc servo |
| Drive principle | servo actuator | servo actuator |
| ArchitectureUse-dependent | Integrated servo module | Rc servo module |
| Gear material | metal | Metal |
| Control & communication3 | ||
| Communication interfacesUse-dependent | PWM;S.Bus2 | PWM |
| Control modesUse-dependent | PWM/S.Bus2 servo | PWM servo |
| Servo signal | PWM | PWM |
| Other specifications1 | ||
| PWM pulse center | 1500 µs | 1500 µs |
Product sources used by this comparison